Skatepark Formula™ (SPF) is very high quality urethane specifically formulated to resist flatspotting on slick or smooth surfaces while maintaining a higher rebound for a quicker response and a faster roll.

Skatepark Formula™ has a high resistance to abrasion while not compromising hardness and slide ability. Simply put… Skatepark Formula wheels grip better on slick surfaces, are almost impossible to flatspot, and are the fastest, longest lasting wheel on the market today.

You won’t find our Skatepark Formula from any other wheel supplier so get a set and find out for yourself what the word on SPF is all about.

About DUROMETER B SCALE

Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.

Shore Durometer B Scale is perfect for skate wheels because:

It is very similar to the A Scale, but reads 20 points lower, allowing the useful scale to be extended by 20 points, which covers the entire hardness range of skate wheels in one scale. It uses the same soft spring as the A Gauge, but the conical gauge needle of the D Scale.
Because the spring is soft, the B Scale gauge needle does not puncture the skin of the wheel surface, resulting in the same reliable reading as the A Scale does.

Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.

Powell Peralta Geegah Skull & Sword - Green Foil Deck

Powell Peralta

Powell Peralta Geegah Skull & Sword - Green Foil Deck

$239.90

Tax included. Shipping calculated at checkout.

Powell Peralta Re-Issue Skateboard Deck

Details

In 1986 jump ramps were all the rage. Easy to build, portable and fun to launch off of. Unfortunately, decks were snapping left and right. Powell-Peralta deck returns were so high the company sought ways to make decks stronger and more resistant to jump breaks. One solution was Bonite construction. Another was the "Gee-Gaw" shape which had bumps to reinforce the break zone area. Why "Gee-Gaw?" Ask Chris Iverson. This shape was also used for the Ripper graphic. They were produced between 1987 and 1988.

About the art:

The Rodriguez "Skull & Sword" deck was the first pro signature deck graphic produced by Powell-Peralta. The graphic was conceived by Ray and Illustrated by V.C. Johnson with art direction from George Powell in 1979

Features:

• long 4 - 2.5" old school truck hole pattern

• Made in Mexico

Powell-Peralta™ Re-Issue Construction

Powell-Peralta re-issue decks are close reproductions of their 1980’s counterparts, featuring the original top and bottom graphics, shape and concave. Made with our partner in Mexico. Materials include U.S. hard rock maple and glue that meets our specifications, warranted against delamination for their useful life. Shape and graphics created in Santa Barbara, CA.

Ace - AF1 Limited Kevin Spanky Long Truck

Ace Trucks MFG

Ace - AF1 Limited Kevin Spanky Long Truck

$149.90

Tax included. Shipping calculated at checkout.

ACE AF1 Kevin Spanky Long Pro Truck

Ace Limited is a specially crafted offering created in tandem with Ace Pilots, and in collaboration with esteemed industry comrades. Each design goes beyond the typical graphic and colorway pro truck treatment, incorporating unique features not found in the rest of the Ace lineup.

Kevin "Spanky" Logo is enlisted for the newest Ace Limited offering, combining his original art with all new AF1 features, making for the lightest and strongest AF1 ever made. This model features all new unbendable special hollowed axles.

Size of choice for Spanky is a 55 (8.5"), this is also available in 44 (8.25").

Over time the Ace Limited will program will include models created in tandem with Ace Pilots, in collaboration with our esteemed brand partners, and new creative touches we've dreamt up in house.• 8.6% Lighter than standard AF1

• Hanger width: 5.6” (143mm)
• Truck height: 2.1” (53mm)
• Manufactured with high-quality AA 356.2 alloy using our own proprietary casting method
• True T6 heat-treated baseplates and hangers
• SAE 4140 steel alloy axles, oversized to eliminate bearing wobble.
• Patent pending rethreading axle nuts - no more damaged axle ends!
• Durable Hand-poured 96a urethane pivot bushings for better response.
• Refined suspension for a cleaner turn.
• Top Bushing: 12mm tall | 91a hardness
• Bottom Bushing: Bottom 14mm tall | 86a hardness
• Machine-faced hanger ends for precise bearing contact.
• Each truck includes bonus gold Axle Re-Theader Die, the gold and red axle re-threader dies are the same item, the gold differentiates the truck in the showcase as a Hollow whereas red is for standard AF1 with solid hanger and kingpin.

See full Ace Size Chart for more technical information on all models

Ace Trucks MFG

Ace - AF1 Limited Brian Anderson Truck

$149.90

Tax included. Shipping calculated at checkout.

ACE AF1 Skateboard Trucks

Ace Limited truck, specially crafted in conjunction with Brian Anderson.

BA began by painting his standard AF1 66 trucks by hand to get the custom colorway exactly as envisioned. Take notice to the red "ACE" logo and black checkers on the baseplate, two rare touches. Looking for a slight increase in weight, and also add a unique touch, the hanger is painted cream then black, with the cream base layer revealing as the black coat is skated off. The "BA" moniker is embossed into the hanger opposite the size marking. Dubbed "Street Pirate" by Frank Gerwer, this namesake is engraved into the axle. This BA edition is offered in his 66 (9.0"), as well as a 44 (8.25") and 55 (8.5")

Over time the Ace Limited will program will include models created in tandem with Ace Pilots, in collaboration with our esteemed brand partners, and new creative touches we've dreamt up in house.

? Manufactured with high-quality AA 356.2 alloy using our own proprietary casting method
? True T6 heat-treated baseplates and hangers
? SAE 4140 steel alloy axles, oversized to eliminate bearing wobble.
? Patent pending rethreading axle nuts - no more damaged axle ends!
? Durable Hand-poured 96a urethane pivot bushings for better response.
? Refined suspension for a cleaner turn.
? Top Bushing: 12mm tall | 91a hardness
? Bottom Bushing: Bottom 14mm tall | 86a hardness
? Machine-faced hanger ends for precise bearing contact.
? Each truck includes bonus red Axle Re-Theader Die

Powell Peralta

Powell Peralta - MINI Skull & Sword Cruiser Complete - Yellow / Blue

$269.95

Tax included. Shipping calculated at checkout.

Powell Peralta Mini Skateboard Complete

Details

Initially released in two distinctly different shapes; a 10" x 30" "Widetail" version and a 10" x 28.5" "Snub Nose, it came in "Brite-Lite" Dayglo yellow, orange, purple and green. In years to follow, it was made in various different colors and a Powell-Peralta logo was added. In 1983 Ray's signature was removed and replaced with a Powell-Peralta script logo. The graphic was also used for T-shirts and stickers.

Originally Released: 1979

Features:

Complete skateboard assembly that's ready to roll out of the box. Our Mini's are scaled down versions of classic Powell Peralta decks. Perfect for the beginner, yet offers durable, quality components that even an accomplished skater would love.

Seven plies of quality birch veneer, cold-fused together using high-impulse, water-resistant glue in Skate One's proprietary AirLam presses. Ensures maximum pop and durability.
High rebound, translucent urethane wheels. Perfect height, width and hardness to provide a smooth ride.
High quality aluminum baseplate and hangar. Hardened steel kingpin and axle. Soft bushings to ease in turning. Slimmed baseplate = less weight.
Mini Logo Skate Rated bearings. High speed nylon ball retainer for greater strength and speed. Single, non-contact, removable rubber shield for easy cleaning and less friction.

Blended silicon carbide grit optimizes grip and durability, grips well in all weather conditions.

Ace Trucks MFG

Ace - AF1 Hollow Polished Truck

$159.95

Tax included. Shipping calculated at checkout.

Ace Skateboard Truck

Price is for 1 truck, add 2 to the cart for a set of trucks (2 trucks)

The all-new ACE AF1 HOLLOWS features hollow axle and kingpin, making for the lightest AF1 to date. The AF1 is carefully manufactured using our proprietary casting process. Years in development, the ACE AF1 has a 70% increase in the aluminum?s structural integrity, making it the strongest cast truck on the market.

8.6% Lighter than standard AF1
Hanger width: 5.6? (143mm)
Truck height: 2.1? (53mm)
Manufactured with high-quality AA 356.2 alloy using our own proprietary casting method
True T6 heat-treated baseplates and hangers
SAE 4140 steel alloy axles, oversized to eliminate bearing wobble.
Patent pending rethreading axle nuts - no more damaged axle ends!
Durable Hand-poured 96a urethane pivot bushings for better response.
Refined suspension for a cleaner turn.
Top Bushing: 12mm tall | 91a hardness
Bottom Bushing: Bottom 14mm tall | 86a hardness
Machine-faced hanger ends for precise bearing contact.
Each truck includes bonus gold Axle Re-Theader Die, the gold and red axle re-threader dies are the same item, the gold differentiates the truck in the showcase as a Hollow whereas red is for standard AF1 with solid hanger and kingpin.