Hyperlite Wakeboard Murray

 

Shaun Murray Signature Wakeboard

Shaun’s favorite, shaped from 30 years of Wakeboard passion. “Ride a Bigger Board.” –Shaun Murray
Countless hours on the water have led Shaun and Nelson to create this shape and the feedback has been mind-blowing. The Murray Pro wakeboard begins with a Subtle 3-Stage Rocker, where there is no flat spot, the rocker simply increases under foot for a colossal boost off the wake. Carrying on from past shapes, Shaun kept the Variable Edge Design and Molded Landing Feature making the board enjoyable for all ability levels. The board’s edge is rounded between the inserts, sharpening under foot and then cupped at the tip and tail delivering solid edge hold when you want it and forgiveness when you need it. Hyperlite’s Biolite 3 Core and compression molded construction keep The Murray super light for easy spinning, flipping and full sends.

CONSTRUCTION FEATURES
•Biolite 3 Core
•Subtle 3-Stage Rocker
•Variable Edge Design
•Molded Landing Feature
•Minimum Swing Weight Profile
•Monocoque Construction
•Layered Glass
•Sized UP Philosophy
•Shaper: Greg Nelson
•M6 Inserts

FINS: 4 - .8” P-Wing

Hyperlite Wakeboard

ASYMMETRICAL ALL ABILITY LEVEL SHAPE

Creating a women's shape to take their skills to the next level was the goal behind the new Eden 2.0. Learning from other asymmetrical designs, we found that creating a shorter but more effective edge on a rider's toe-side made hard to learn wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The Eden 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

TECH DETAILS

LAYERED GLASS
Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.

MONOCOQUE CONSTRUCTION
Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.

SATIN FLEX
Tailored specifically to a female rider's needs. A softer glass layup creates a more supple flex and a board built to our top female riders' standards.

ABRUPT CONTINUOUS ROCKER
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.

MOLDED-IN FINS

M6 INSERTS

ASYMMETRICAL DESIGN

MOLDED-IN TOE SIDE FOOTBED RISERS

Hyperlite Wakeboard

The Aussie Sheila is back with a brand new shape named the Journey, fitting Bec as she’s had an amazing one in the world of wakeboarding. The Journey features a 3-Stage Rocker for great pop off the wake, any size wake that is. An aggressive edge approach is achieved with a cupped rail at tip & tail. This is a forgiving ride as well; between the bindings the Journey has a beveled edge and the landings are cush thanks to the Soft Landing Spine. Satin Flex delivers a flex pattern ladies enjoy and the Journey is available in 3 sizes so groms and adults can shred the Journey in 2025. 

CONSTRUCTION FEATURES

• Biolite 3 Core
• 3-Stage Rocker
• Satin Flex
• Dual Concave Base
• Soft Landing Spine
• Forgiving Rail Profile: Beveled Edge between Bindings
• Cupper Rail Tip & Tail for Aggressive Edge Set
• Flat Fin Mount – Better Water Flow - Increases Hold

Fins: 4 - .8 P-Wing

Hyperlite Wakeboard

Take your wake riding to new heights with the extra pop and support of the ultralight Prizm.  

The Prizm shares the same shape as the Murray 20th Anniversary Pro Model but is laid up with Hyperlite's lady specific Satin Flex, ensuring the board responds to the female rider in the appropriate manner.

The Prizm shape begins with a Subtle 3-Stage Rocker, there is no flat spot, the rocker simply increases under foot for a colossal boost off the wake.

The board's edge is rounded between the inserts, sharpening under foot and then cupped at the tip and tail, delivering solid edge hold when you want it and forgiveness when you need it.

The Prizm is sure to become the favorite amongst our team, get on one today and enjoy the ride for yourself.

Hyperlite Wakeboard

JB’s audience across social media has been asking when this day would come. Here we are and Hyperlite is stoked to introduce his new signature wakeboard, the Sender.

 Available in 4 sizes so everyone can ride what JB does. Designed with a 3-Stage Rocker, the Sender supplies a great pop off any wake size.

The Dual Concave Base channels water for additional speed and control. A forgiving ride was JB’s goal, beveled edges between the bindings and a Soft Landing Spine ensure this.

 The Sender will also set an aggressive edge on approach to the wake with cupper rails and tip & tail. It’s our guess that riders who choose the Sender could end up on JB’s YouTube and Instagram channel, you’ll have to submit your content to the man himself.

CONSTRUCTION FEATURES

• Biolite 3 Core
• 3-Stage Rocker
• Dual Concave Base
• Soft Landing Spine
• Forgiving Rail Profile: Beveled Edge between Bindings
• Cupper Rail Tip & Tail for Aggressive Edge Set
• Flat Fin Mount – Better Water Flow - Increases Hold

Fins: 4 - .8” P-Wing

Hyperlite Wakeboard

Size matters according to Rusty Malinoski. His new Rusty Pro shape provides the surface area for massive airs but he says "My board feels lighter than anything I've ever ridden."

With more length comes a wider overall profile, creating a more poppy feel, "Light & poppy & snappy" says Rusty.

As with previous shapes from Aaron Stumpf for Rusty, this board will take you swiftly to the wake holding edge all the way.  New for Rusty is a set of shorter .7" SS Beam Fins, which when desired will allow you to break free or save landings when you?re a tad off the mark. 

CONSTRUCTION FEATURES

Biolite 3 Core 

• Abrupt Continuous Rocker
• Progressive Edge Bevel 
• Full Length Cupped Rail 
• Molded Landing Feature
• Dual Tip to Tail Channel
• Monocoque Construction
• Layered Glass
• Sized UP Philosophy
• M6 Inserts 

Hyperlite Wakeboard

Loaded Construction marks the dawn of the most advanced construction ever offered in the wake industry. Utilizing Proprietary materials and manufacturing processes, Loaded Construction delivers the lightest and most responsive wakeboard to date, just ask Trever. His Blueprint provides wakeboarders of all abilities a freewheeling and soulful ride that can break free in the flats and hook up on approach for a crazy pop off the wake. The deep long spine on the belly breaks up water and Trever says it's the Softest landing board ever in, allowing him to focus more on his tricks vs. hitting the sweet spot for landing. Adding to that insane pop are scooped tip and tail shapes, leaving you stoked every time you hit the wake. The Blueprint will elevate your riding to new levels while feeling free, fun and playful for your wake session.

CONSTRUCTION FEATURES

• Loaded Construction
• 3K Carbon Top & Base
• Continuous Rocker
• Variable Edge Design
• Dual Concave Base
• Molded Landing Feature
• Layered Glass
• Monocoque Construction
• Sized UP Philosophy
• Shaper: Aaron Stumpf
• M6 Inserts

Fins:  4-Pack - 0.7 Blueprint

Size matters according to Rusty Malinoski. His new Rusty Pro shape provides the surface area for massive airs but he says ?My board feels lighter than anything I?ve ever ridden.? With more length comes a wider overall profile, creating a more poppy feel, ?Light & poppy & snappy? says Rusty. As with previous shapes from Aaron Stumpf for Rusty, this board will take you swiftly to the wake holding edge all the way.  New for Rusty is a set of shorter .7? SS Beam Fins, which when desired will allow you to break free or save landings when you?re a tad off the mark. 

CONSTRUCTION FEATURES

Biolite 3 Core 

• Abrupt Continuous Rocker
• Progressive Edge Bevel 
• Full Length Cupped Rail 
• Molded Landing Feature
• Dual Tip to Tail Channel
• Monocoque Construction
• Layered Glass
• Sized UP Philosophy
• M6 Inserts 

Hyperlite Wakeboard

ASYMMETRICAL ALL ABILITY LEVEL SHAPE

Creating a women's shape to take their skills to the next level was the goal behind the new Eden 2.0. Learning from other asymmetrical designs, we found that creating a shorter but more effective edge on a rider's toe-side made hard to learn wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The Eden 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

TECH DETAILS

LAYERED GLASS
Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.

MONOCOQUE CONSTRUCTION
Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.

SATIN FLEX
Tailored specifically to a female rider's needs. A softer glass layup creates a more supple flex and a board built to our top female riders' standards.

ABRUPT CONTINUOUS ROCKER
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.

MOLDED-IN FINS

M6 INSERTS

ASYMMETRICAL DESIGN

MOLDED-IN TOE SIDE FOOTBED RISERS

Forgiving First Ride

 Her wakeboard adventure begins with the Divine.

 A board preferred by beginner/intermediate riders who like the flowing feel of the original free ride series. The Divine provides a mellower turn with smoother lift off the wake. This series is perfect for anyone's first time behind the boat and improving skills to move to the next level

CONSTRUCTION FEATURES 

•          Molded-in Fins
•          Continuous Rocker
•          Forgiving 6 degree Edge Bevel
•          V Bottom Tunnel
•          Monocoque Construction
•          Layered Glass
•          Satin Flex
•          M6 Inserts

Hyperlite Wakeboard

The Hyperlite Motive is preferred by all beginner riders for its easy free flowing feel and design. The shape of the Motive is based around building technique and helping development in those early stages of wakeboarding with a subtle rocker line, combined with a biolite 3 core the Motive remains lightweight without feeling like it will ride aggressively. Combined with a supportive base structure the Motive will not only allow easy edge to edge transitions, but with a monocoque construction will also remain strong.

Rocker Line

• Continuous Rocker - A Continuous rocker provides a super smooth and predictable kick of the wake, keeping speed, but giving plenty of time for smooth grabs and stylish transitions.

Board Flex

• Energy Rating(1=Delayed/Stored Energy, 10=Instant Explosiveness) - 4/10

Core Construction

• Biolite 3 – The core you want under your feet, from a beginner to pro. Biolite 3 PU foam is wrapped in fibreglass for a added strength to handle punishment, but is lighter and more durable than anything in wakeboard history. Welcome to Hyperlite’s nuclear deterrent

Rails/Edges

• 6 Degree Edge Bevel - a super smooth rounded edge profile, so whether you come into an edge mellow or aggressive, it will always feel comfortable

Laminates

• Monocoque Construction - An outer glass wrap from the bottom to the top so the flash line is switched out as the weakest point fo the board, to the strongest. It is also renowned as the most durable construction in wakeboarding
• Layered Bi-Axial Glass – Making sure your board doesn’t soften over the years, layered fibreglass will help to keep you poppin’

Base

• V Bottom Hull - Helps to promote edge use by rolling into edges and providing a stable platform once on edge

Fins

• Centre Mounted Fins – A super easy tracking fin to stabilise and track through turns
• Subtle Outer Molded Fins

Rider Level

• Riding Ability: Beginner

Board Sizing

(134cm) - Up to 80Kgs

(140cm) -  70Kgs and Up

Package with Frequency boots for an awesome boat board

HYPERLITE

Discover HYPERLITE at Hyper Ride NZ for premium wakeboards, life vests, and water sports gear. HYPERLITE offers high-performance equipment designed to elevate your time on the water, whether you're wakeboarding or enjoying other water activities. Get the best in quality and performance with fast and reliable delivery from Hyper Ride, ensuring your water gear arrives quickly and in excellent condition.

Hyperlite Wakeboard

Free rider's delight blending an aggressive and user friendly feel.

The Cryptic series yields quick edge response and aggressive feel with massive pop off the wake as requested by Josh Twelker. Shaped by Greg Nelson the Cryptic is a fast board incorporating a continuous rocker and slightly wider profile. The shape includes a subtle landing feature in the belly transitioning to dual concave tunnels exiting the tip & tail for an aggressive approach to the wake. The variable edge design is bevelled between the stance platform for a forgiving feel sharpening at tip & tail for secure edging. Twelker says the Cryptic is a free rider?s delight with effortless carving and an explosive pop off the wake. 

CONSTRUCTION FEATURES

- Continuous Rocker

- Biolite 3 Core

- Variable Edge Design

- Minimal Swing Weight Profile

- Variable Thickness Profile

- Monocoque Construction

- Layered Glass

?Shaper: Greg Nelson

?M6 Inserts

ASYMMETRICAL ALL ABILITY LEVEL SHAPE

Creating a women's shape to take their skills to the next level was the goal behind the new Eden 2.0. Learning from other asymmetrical designs, we found that creating a shorter but more effective edge on a rider's toe-side made hard to learn wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The Eden 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

TECH DETAILS

LAYERED GLASS
Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.

MONOCOQUE CONSTRUCTION
Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.

SATIN FLEX
Tailored specifically to a female rider's needs. A softer glass layup creates a more supple flex and a board built to our top female riders' standards.

ABRUPT CONTINUOUS ROCKER
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.

MOLDED-IN FINS

M6 INSERTS

ASYMMETRICAL DESIGN

MOLDED-IN TOE SIDE FOOTBED RISERS

Creating a shape to take riders? skills to the next level was the goal behind the new State 2.0. Learning from other asymmetrical designs, Hyperlite found that creating a shorter but more effective edge on a rider?s toe-side made hard to learn wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the State 2.0?s thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The State 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.

Available Sizes: 130cm, 135cm, 140cm, 145cm

FEATURES

• Asymmetrical Design
• Molded-in Fins
• Abrupt Continuous Rocker
• Molded-In Toe Side Footbed Risers
• Monocoque Construction
• Layered Glass
• M6 Inserts
• Fins: 2 ? 1.3 inch Disorder
• SHAPED By: Aaron

https://youtu.be/aMjKVzBW8Yk

Forgiving First Ride

 Her wakeboard adventure begins with the Divine.

 A board preferred by beginner/intermediate riders who like the flowing feel of the original free ride series. The Divine provides a mellower turn with smoother lift off the wake. This series is perfect for anyone's first time behind the boat and improving skills to move to the next level

CONSTRUCTION FEATURES 

•          Molded-in Fins
•          Continuous Rocker
•          Forgiving 6 degree Edge Bevel
•          V Bottom Tunnel
•          Monocoque Construction
•          Layered Glass
•          Satin Flex
•          M6 Inserts