Hyperlite Handle Progression 75ft

Shaun Murray?s Low Risk / High Reward Wake Rope

5? Handle + 70? Rope for Total Length 75?
Progression Rope ? 40? + 5? + 5? + 5? + 5? + 5? + 2.5? + 2.5?  
Diameter: 1.2? / 30.5mm


The Progression Rope offers more sections than any other rope so you can position yourself on the wake at different speeds making it easier to learn new tricks. At 45? Rope and Handle length you can learn those wake-to-wake tricks that might seem intimidating at your normal speed & rope length. With a slower boat speed, you can lessen the risk factor while maintaining a high reward factor. Gradually lengthen your rope as your skill level progresses. Make your learning experience low risk / high reward and progress your skills behind the boat.

FEATURES
??Chamois Grip?
?New Handle Foam Floats
?ARS (Anti-Roll System) Endcaps
?15? Handle Bar Length
?1.2? Handle Diameter (30.5mm)
?70? Fuse Line with 5 ? 5? & 2 ? 2.5? Sections

Largest Wake Shaper face 14 x 18 inches = 252sq inch Patented Concave Water Channeling Wing Our concave channeling wing surface pushes more water to increase the length of the wave, while keeping the face super clean! 

Super Strong Suction Cup Attachment Our 4.5 inch rubber suction cups won?t damage gel coat or leave black markings on your boat. Easy to adjust on the fly, No ugly Velcro or safety tethers required. 

Made with Durable Rust Free Materials We Build the WakeSurf Edge with impact resistant, lite weight glass filled nylon 6.6. and rust free stainless steel hardware. Our shaper is long lasting; won?t rust or stain your boat. 

Built In Flotation Don?t worry about your wake shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed air tight. 

Make the most of the MEGA WAKE SURF EDGE , Recommended boat 21? or longer, have a 325hp engine or greater, ese with FatSac water ballast systems. Level load your boat to keep the nose down for the captain?s visibility and a longer wake.

Wake Shaper face 9 x 16 inches = 144sq inch face Patented Concave Water Channeling Wing Our concave channeling wing surface pushes more water to increase the length of the wave, while keeping the face super clean! 

Super Strong Suction Cup Attachment Our 4.5 inch rubber suction cups won?t damage gel coat or leave black markings on your boat. Easy to adjust on the fly, No ugly Velcro or safety tethers required. 

Made with Durable Rust Free Materials We Build the WakeSurf Edge with impact resistant, lite weight glass filled nylon 6.6. and rust free stainless steel hardware. Our shaper is long lasting; won?t rust or stain your boat. 

Built In Flotation Don?t worry about your wake shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed air tight. Make the most of the WAKE SURF EDGE Use with Fastac water ballast systems. Level load your boat to keep the nose down for the captain?s visibility and a longer wake.

An excellent value, these inflatable bumpers are going to revolutionize boat bumpers as we know them. Simply pull the plug on the bottom to release the air and they flatten to the size of a pancake.

Small 7.5" x 22"

Large 9" x 27"

*Rope Not included

Essentially, this bag has you and your gear covered. Large enough to house your complete set up, a new rope and handle and even your boardies, the Essential includes a padded shoulder strap, easy to grab carry handle and wide open zipper, making it simple to protect your gear. Great for day travel and an occasional flight, choose red, blue or pink and let your adventure begin.

Heavy Duty Nylon

Locking Grab Handles

Padded Shoulder Strap

Keep your board protected from the sun with the Hyperlite Surf Sock, designed for traditional nose boards.

Care for your wakesurfer and it will take care of you! Hyperlite introduces Surf Socks, available in two sizes and made of plush terrycloth fabric that will wick away water for dry storage. The nose is reinforced with heavy duty nylon and the tail incorporates a drawstring closure. Remove your fins and store them in the Surf Sock fin pouch until your next session.

Set of 4 M6 Thumb Screw bolts with self-locking adhesive included with 4 Hyperlite Binding Washers.

Compatible with all modern Hyperlite Wakeboard Boots (M-6 Thread Pattern which is for 2013 models and above)
Not compatible with System Bindings

The transition from enthusiast to diehard isn't complete until you have a getaway bag for your new Hyperlite set up. The Producer will get you and your gear there safely, encased in foam padding, including multiple storage pockets for wet and dry gear and room to store much more than just your board. Opens completely for simple packing with grab and go handles and a padded shoulder strap, the Producer is available in two designs including the Ladies Producer. Length: 59" Width: 22" Depth: 5" 

Heavy Duty Nylon

Locking Grab Handles

Padded Shoulder Strap

Fin & Accessory Pouch

Get instant response with this high-tech wakesurf fin set. The Hyperlite 4.5'' Riot Carbon Surf Fin Kit will have you snapping turns left and right.

Includes

4.5" Fins

Fin Key

Material

Carbon Strips for Instant Rebound

Dimensions

4.5"

Inside Foil Profile

Features

RTM Construction

Compatible with Futures Fin Boxes

If you travel to catch the best wakes in the most dynamite locations, the new Travel Wakesurf Bag will keep your baby cozy and safe.  Available in two sizes that encapsulate our Quad Series, this travel bag is designed for multiple blunt nose surfers. If you want to include your diamond tip surfer we provide inserts for nose protection. Find the wave and shred it.

Heavy Duty Nylon

Locking Grab Handles

Padded Shoulder Strap

Fin & Accessory Pouch

Hyperlite's new SG handle is a Pro Level Handle with a sublimated Stitched Grip including new lightweight end caps. SG may also reference Sticky Grip or Soft Grip, either way our new SG Packages deliver a Solid Grip.  SG w/ A-Line: 85' Total Length / 4 Take Off Loops / 2 x 5' & 2 x 2.5' 

Colors: Blue, Red, Yellow, Green, Orange

Foam Buoyancy Plugs (This Handle Floats)

ARS (Anti-Roll System) Equipped

15in. Handle Bar Length

Available with an 80' A-Line

Hyperlite's new CG Handle is the ever popular Chamois Grip including new lightweight end caps. As you up your skill level, lengthen your rope for higher performance. The CG Handle Packages will take you to new heights. CG w/ Poly-E Line: 65' Total Length / 3 Take Off Loops / 3 - 5' Loops

Colors: Blue, Red, Yellow, White

"Chamois Grip"

New Handle Foam Floats

ARS (Anti-Roll System) Equipped

15in. Handle Bar Length

60' Poly-E Line with 3 ? 5' Sections

65' Total Length

Hyperlite's new CG Handle is the ever popular Chamois Grip including new lightweight end caps. As you up your skill level, lengthen your rope for higher performance. The CG Handle Packages will take you to new heights. CG w/ Maxim Line: 70' Total Length / 3 Take Off Loops / 3 - 5' Loops

Colors: Blue, Red, Yellow, White

"Chamois Grip"

New Handle Foam Floats

ARS (Anti-Roll System) Endcaps

15in. Handle Bar Length

70' Total Length

Each of our Webbing Dock Ties are available in 4', 5' & 6' lengths, and make docking and securing your vessel a cinch. The clip at each end placed near the loop offers a quick and secure way to attach to cleats, eyelets & towers. A must have for sure, secure to your friend's boat for the afternoon flotilla.

Replacement lace locks (4) to fit any Hyperlite Wakeboard Boots.

Each of our Bungee Dock Ties are available in 4', 5' & 6' lengths, and make docking and securing your vessel a cinch. A must have for sure, easy for looping cleats on your boat and the dock. Secure to your friend's boat for the afternoon flotilla.